Blog Archives

TWO DIGIT COUNTER USING IR TRANSMITTER AND RECEIVER

This project is an Application/extension of Digital Pulse Counter.

Transmitter Part: The transmitter circuit (see Fig. 1) is built around timer NE555 (IC1), which is wired as an astable multivibrator producing a frequency of about 38 kHz. The infrared (IR) beam is transmitted through IR LED1.

HERE A is +9V and B is GND.

TransmitterIR TRANSMITTER(38KHz)

Receiver Part: There are two 7 segment displays driven by two CD4026B (CMOS DECADE COUNTER/DIVIDER) used here to count up to 99. Seven Segment display used are common cathode type(see fig below).

7seg Led7 SEGMENT DISPLAY(COMMON CATHODE TYPE USED)

Moving ahead when the transmitted signal is cut, Pulses are generated by the IR receiver TSOP1738. The output of TSOP1738 is then fed to monostable multivibrator circuit made using NE555. Then the controlled stable pulse of 250ms (T=1.1*R*C) is fed to CD4026B which will drive the unit place display to make it count from 0 to 9. When it overflows, carry is generated by this IC and this carryout is fed to another CD4026B driving Tens Place display . Thus making the whole circuit count 0 to 99. Similar CD4026 circuit can be added to increase the number of counts.

SchematicIR RECEIVER

This Circuit has various applications such as spring oscillation counting, Counting no of people entering through door(one way), as a bugular alarm, etc.

Here you can download the PDF Schematic of the receiver part.

Video:  TWO DIGIT FREQUENCY COUNTER USING IR TRANSMITTER AND RECEIVER

%d bloggers like this: